/*******************************************************************************
*
* McStas, neutron ray-tracing package
*         Copyright (C) 1997-2008, All rights reserved
*         Risoe National Laboratory, Roskilde, Denmark
*         Institut Laue Langevin, Grenoble, France
*
* Instrument: templateSANS
*
* %Identification
* Written by: <a href="mailto:kim.lefmann@risoe.dk">Kim Lefmann</a>
* Date: 19th Dec 2003.
* Origin: <a href="http://www.risoe.dk">Risoe</a>
* %INSTRUMENT_SITE: Templates
*
* Test instrument for the Sans_spheres component. No guide / velocity selector
* etc. Will be developed further at later time.
*
* %Description
* Very simple test instrument for the Sans_spheres component
*
* %Test: lambda=6 Detector: detector_I=0.556137
*
* %Parameters
* lambda: [AA]          Mean wavelength of neutrons
* dlambda: [AA]         Wavelength spread of neutrons
* r: [AA]               Radius of scattering hard spheres
* PHI: [1]              Particle volume fraction
* Delta_Rho: [fm/AA^3]  Excess scattering length density
* sigma_abs: [barns]    Absorption cross section at 2200 m/s
*
* %Link
*
* %End
*******************************************************************************/
DEFINE INSTRUMENT templateSANS(lambda=6, dlambda=0.05, r=100, PHI=1e-3, Delta_Rho=0.6, sigma_abs=0.5)

TRACE

COMPONENT a1 = Progress_bar()
  AT (0,0,0) ABSOLUTE

COMPONENT arm = Arm(
    )
  AT (0, 0, 0) ABSOLUTE

COMPONENT source = Source_simple(
    radius = 0.02, dist = 3, focus_xw = 0.01, focus_yh = 0.01,
    lambda0 = lambda, dlambda = dlambda, flux = 1e8)
  AT (0, 0, 0) RELATIVE arm

COMPONENT coll1 = Slit(
    radius = 0.005)
  AT (0, 0, 3) RELATIVE arm

COMPONENT coll2 = Slit(
    radius = 0.005)
  AT (0, 0, 6) RELATIVE arm

SPLIT COMPONENT sample = Sans_spheres(
  R=r, Phi=PHI, Delta_rho=Delta_Rho, sigma_abs=sigma_abs,
  xwidth=0.01, yheight=0.01, zdepth=0.005, focus_xw=0.6, focus_yh=0.6, target_index=2)
   AT (0,0,0.2) RELATIVE coll2


COMPONENT STOP = Beamstop(
    radius = 0.02)
  AT (0, 0, 2.9) RELATIVE sample


COMPONENT detector = PSD_monitor(
    nx = 128, ny = 128, filename = "PSD.dat", xmin = -0.3,
    xmax = 0.3, ymin = -0.3, ymax = 0.3)
  AT (0, 0, 3) RELATIVE sample

COMPONENT Ldetector = L_monitor(
    nL = 1000, filename = "Edet.dat", xmin = -0.3,
    xmax = 0.3, ymin = -0.3, ymax = 0.3, Lmin = 5.5,
    Lmax = 6.5)
  AT (0, 0, 3.01) RELATIVE sample


COMPONENT PSDrad = PSD_monitor_rad(
    filename = "psd2.dat", filename_av = "psd2_av.dat", rmax = 0.3)
  AT (0, 0, 3.02) RELATIVE sample

END